Garage doors provide security for our vehicles and extra storage space, but when they malfunction, they can create a lot of headaches. If your garage door won’t open or close, here are some tips on how to handle the situation. Keep in mind that these steps are only meant as a temporary fix until you can get professional help visit TitanGarageDoors`s official website.
1. What to do when your garage door opener fails
When your garage door opener fails, it can be a real emergency. The first thing you should do is call a professional garage door repair service. They will be able to come out and assess the problem and make the necessary repairs. In the meantime, there are a few things you can do to try and fix the problem yourself.
First, check to see if the batteries in the remote are dead. If so, replace them and see if that works. If not, try unplugging the unit and plugging it back in. This may reset the system and get it working again. If all else fails, you may need to replace the entire garage door opener unit.
2. How to open a garage door manually
If your garage door doesn’t open, don’t panic! In most cases, you should be able to open it manually. However, before you begin, it’s important to understand how your garage door works. Most garage doors have two parts: the door itself and the opener. The opener is responsible for lifting the door; the door itself is simply a panel that slides up and down. In most cases, the opener is controlled by a remote or by a switch inside the garage. If your opener is not working, you will need to open the door manually. Visit https://www.sosgaragedoorrepairs.com/to learn more.
First, locate the emergency release cord. This cord is usually attached to the opener near the floor. Pull on the cord until you feel resistance; this will disengage the opener from the door.
Next, find the torsion spring above the door. The torsion spring helps to balance the weight of the door; without it, opening the door manually would be very difficult. Gently pull on the spring until there is enough slack to lift the door.
Finally, lift up the door until it is fully open. Once you have opened the door, you can reconnect the emergency release cord and resume using your garage as normal.
3. What to do if the cables or springs break
If the cables or springs break on your garage door, you will need to replace them. You can do this by following these steps:
- Open the garage door and disconnect the opener.
- Remove the screws that hold the cable drum in place.
- Remove the old cable and replace it with a new one.
- Repeat steps 2 and 3 for the other cable.
- Reattach the cable drums and reconnect the opener.
4. How to fix a bent track
If your track is bent, you will need to fix it as soon as possible. This can be done by using a hammer to straighten the track back out. Be careful not to hit the door itself while doing this. Once the track is straight, use a level to make sure it is still aligned. If it is not, you may need to adjust the brackets that hold the track in place.